CÚPULA RACING PUIG PARA BMW R1250GS 2019

ESP ENG FRA
 
ESP
Cúpula derivada de la competición. Su doble altura disminuye el efecto del aire el casco. Fabricada en acrílico de alto impacto de 3mm, resistente y duradero. Perfil redondeado en >2mm en los modelos desde el 2004, cumpliendo con la normativa del TÜV alemán. No se requiere ribete. Disponemos de cúpulas tipo Z-RACING y R-RACER según modelos.
Las cúpulas Z-RACING son aquellas estudiadas en el túnel del viento que mejoran el coeficiente aerodinámico y la protección contra el viento en posición erguida en un 12,7% de promedio con respecto a la original. Y en un 61% de promedio en posición racing.
Las cúpulas R-RACER  estudiadas en el túnel del viento, estan desarrolladas conjuntamente con equipos de competición del mundial de SBK y Resistencia para conseguir un perfecto balance entre proteccion contra el viento y la mejora del coeficiente aerodinámico.
Se entregan estudios aerodinámicos con la mayoría de nuestras cúpulas.
Medidas (Altura x Anchura): 320 x 340 mm
 
 
 
ENG
RACING SCREEN
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable. Round finished edge on >2mm models from 2004, meeting the standards for the german TÜV. Edge trim is not necessary. Available windscreens type Z-RACING and R-RACER according to models.
The Z-RACING windscreens have been tested through our virtual wind tunnel and improve the aerodynamic coefficient and wind protection on an upright position with a 12.7% average compared to the original. And a 61% average on a racing position.
The windscreens R-RACER have been tested through the wind tunnel and developed jointly with World SBK and Resistance racing teams in order to achieve a perfect balance between wind protection and aerodynamic coefficient improvement.
Aerodynamic tests are supplied with most of our windscreens.
320 x 340 mm
 
 
FRA
BULLE RACING
Windscreen derived from competition. Its double height diminishes the air pressure to the helmet. Made of 3mm High Impact acrylic, resistant and durable. Round finished edge on >2mm models from 2004, meeting the standards for the german TÜV. Edge trim is not necessary. Available windscreens type Z-RACING and RACE-R according to models.
The Z-RACING windscreens have been tested through our virtual wind tunnel and improve the aerodynamic coefficient and wind protection on an upright position with a 12.7% average compared to the original. And a 61% average on a racing position.
The windscreens RACE-R have been tested through the wind tunnel and developed jointly with World SBK and Resistance racing teams in order to achieve a perfect balance between wind protection and aerodynamic coefficient improvement.
Aerodynamic tests are supplied with most of our windscreens.
320 x 340 mm